If you are a property buyer or seller in Pakistan, you may have come across the term 'marla' in real estate transactions. It's important to know how to calculate marla so you can accurately measure your property's size.
When it comes to buying or selling property, it's important to have a good understanding of different units of area measurement. The most commonly used units of area measurement include square feet, square meters, square yards, and square inches.
A square foot is a unit of area measurement equal to a square that measures one foot on each side. It is commonly used to measure the size of rooms, apartments, and houses. One square foot is equal to 0.0929 square meters.
Square meters are the standard unit of area measurement in the metric system. It is equal to a square that is 1 meter on each side. It is used for measuring areas of rooms, houses, blocks of land, etc. One square meter is equal to 10.764 square feet.
A square yard is a unit of area measurement equal to a square that measures one yard on each side. One square yard is equal to 0.8361 square meters or 9 square feet. It is often used to measure the area of large outdoor spaces.
Square inches are a unit of area measurement equal to a square that measures one inch on each side. It is commonly used to measure small areas, such as the size of a piece of paper or a photograph. One square inch is equal to 6.452 square centimetres.
Buyers and sellers can ensure they are on the same page when discussing the size and value of a property.
Here's a table summarizing the common land-measuring units in Pakistan:
It's important to note that these units may vary slightly depending on the location, as different regions may have their local units of measurement.
However, these are the most commonly used units across Pakistan. Understanding these units is important for buying, selling, or estimating the value of the land.
Before we dive into how to calculate marla, let's first understand what it is. A marla is a unit of measurement commonly used in Pakistan to measure land. It's equal to 272.25 square feet or 25.2929 square meters.
Now let’s explore how to calculate marla, how to convert marla to square feet, and how to calculate marla from length and width measurements.
Calculating marla in Pakistan is relatively easy. The most common method is to use the square footage of the land and divide it by 272.25.
For example, if the total area is 1,000 square feet, the calculation would be:
1000 / 272.25 = 3.67 marlas (rounding off to 4 Marlas)
Likewise, if the total area is 500 square yards, the calculation would be:
500 / 272.25 = 1.83 marlas (rounding off to 2 Marlas)
To calculate marla from feet, you need to know the total area of the land in square feet. Once you have this figure, you can use the following formula to calculate how many marlas the land measures:
Total Area (in Square Feet) / 272.25 = Total Area (in Marla)
For instance, if you have a piece of land that measures 1,080 square feet, you can calculate how many marlas it is by dividing the total area by the area of one marla, as follows:
1,080 / 272.25 = 3.97 marla
Therefore, the piece of land measures approximately 3.97 marlas. Since marla is a unit of measurement that is not usually expressed in decimal points. You can round off the figure to the nearest whole number, which is 4 marla.
To calculate marla from length and width measurements, you need to know the total area of the land in square feet. You can then use the following formula to calculate how many marlas the land measures:
Length (in Feet) x Width (in Feet) / 272.25 = Total Area (in Marla)
Suppose you have a piece of land that measures 20 feet by 54 feet, you can calculate how many marlas it is by multiplying the length and width measurements to get the total area in square feet, as follows:
20 feet x 54 feet = 1,080 square feet
If you want to convert marlas to square feet, simply multiply the number of marlas by 272.25. For example, if you have 05 marlas, multiplying by 272.25 gives you 1,361.25 square feet.
Knowing how to calculate marla is an essential skill for property owners in Pakistan. Whether you're measuring land for sale or purchase, it's critical to determine the size of the property.
The actual size may vary slightly from one location to another, so it's always a good idea to double-check with local authorities or surveyors to ensure that you have accurate information about the size of a marla in your specific location.
By following these resources, you can understand the real estate market and the various factors that can impact the value of a property.